Figure 1-1 Connecting the power cord to the AC adaptor (2-pin plug)
Figure 1-2 Connecting the power cord to the AC adaptor (3-pin plug)
Either a 2-pin or 3-pin adaptor/cord will be included with the computer
depending on the model.
2.
Connect the AC adaptor’s DC output plug to the DC IN 19V jack on
your computer.
Figure 1-3 Connecting the DC output plug to the computer
1
2
1. DC IN 19V jack
2. DC output plug
3.
Plug the power cord into a live wall outlet - the
Battery
and
Power
indicators on the computer should glow.
Turning on the power
This section describes how to turn on the power - the
Power
indicator will
then indicate the status. Please refer to the
section in Chapter 5, Power and Power-Up Modes for more information.
After you turn on the power for the first time, do not turn it off until you
have set up the operating system.
TOSHIBA WT200
User's Manual
1-4
Содержание wt200
Страница 1: ...User s Manual TOSHIBA WT200 ...