TY-ASC402
Wireless Sound System
Operation Manual
Thank you for purchasing this Party Speaker with illumination.
To use this product safely, read and understand this operation manual thoroughly before using.
After reading this manual, keep it in a safe place so that it can be referred to when necessary.
5029800
Safety precautions
The information you need to prevent danger to the user and other people as well as property
damage is described below. “Description of signs” shows different categories of the degree
of danger or damage that may occur due to wrong handling. “Description of symbols” shows
the meaning of the symbols.
Important notes
• This book is only a guide for user's operation, not a criterion for configuration.
• Only use attachments/accessories specified by the manufacturer.
The lightning flash with arrowhead symbol, within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Warning: To reduce the risk of electric shock, do not remove cover (or back).
NO user-serviceable parts inside. Refer RISK servicing to qualified service
personnel.
This symbol indicates that this product incorporates double insulation
between hazardous mains voltage and user accessible parts.
WARNING
- Minimum 5cm around the apparatus for sufficient ventilation.
- The ventilation should not be impeded by covering the ventilation openings with items,
such as newspapers, table-cloths, curtains, etc.
- No naked flame sources, such as lighted candles, should be placed on the apparatus.
Description of signs
Indicates that there is a risk of death or serious
injury.
Indicates that there is a risk of light injury or
property damage.
Description of symbols
Indicates “Prohibition” or “You must not do” with pictures and text.
Indicates “Mandatory Action” or “Do as indicated” with pictures and text.
What to do in the case of an abnormality
• Stop using the device immediately in the case of an abnormality or failure.
• Remove the power plug from the receptacle immediately when any water or
foreign object enters the interior of the device.
It may cause a fire or electric shock. Remove the power plug immediately, and
contact your dealer for a repair.
Power cord and power plug
• If any dust exists on the power plug pin or pin installation surface, remove the
power plug and remove the dust.
• The mains plug is used as disconnect device, the disconnect device shall remain
readily operable.
• Observe the following when handling the power cord.
•Do not damage it.
•Do not modify it (e.g. extension).
•Do not heat it.
•Do not pull it.
•Do not place a heavy object on it.
•Do not pinch it.
•Do not bend it forcefully.
•Do not twist it.
•Do not bundle it.
Doing so may cause a fire or electric shock.
• Do not insert or remove the power plug with a wet hand.
Doing so may cause a fire or electric shock.
• When removing the power plug from the receptacle, hold the power plug.
• If the device will not be used for a long time, remove the power plug from the receptacle.
Doing so may cause a fire or electric shock.
• Do not use any power cord other than the one that comes with the device.
• Do not use the power cord that comes with the device for any other product.
Doing so may cause a fire or electric shock.
Usage
• Do not disassemble, repair, or modify the device.
• Do not insert any foreign object.
• When lightning starts, do not touch the antenna or power cord.
Doing so may cause a fire or electric shock.
• The use of apparatus in moderate climates.
• Before carrying the device, retract the antenna and remove the power plug
from the receptacle.
Failure to do so may cause a fire, electric shock, or injury.
• Do not get on top of the device.
• Do not place a heavy object on the device.
• Do not block the ventilation hole.
• When the appliance coupler is used as the disconnect
device, the appliance coupler shall remain readily operable.
• To prevent possible hearing damage, do not listen at high
volume levels for long periods.
Doing so may cause an injury or fire.
Installation
• Place the unit on a flat surface away from sources of direct sunlight or excessive heat.
• Do not install the device in a confined or build-in space such as a book
case or similar area, and keep it under a well-ventilated condition. The
ventilation should not be impeded by covering the ventilation openings
with items such as newspaper, table-cloths, curtains, etc.
• Do not expose the device to rain, moisture, dripping, or splashing.
• Do not place objects filled with liquids, such as vases, on the device.
• Do not put any object on the top panel of the unit.
• Do not stack any object on the unit.
• Do not allow children to climb on the unit.
• Be careful when babies or children are near.
Doing so many cause a fire or electric shock.
• The mains plug is used as disconnect device, the disconnect device shall
remain readily operable.
Doing so many cause a fire or electric shock.
Notes
• If any color shift occurs on a nearby TV or the radio of this device picks up noise
from the TV, keep this device away from the TV.
Disclaimer
• Toshiba shall not be responsible for any damage caused by an earthquake,
thunderstorm, flood damage, fire for which Toshiba is not responsible, acts of a third
party, other accidents, or damages caused by the user's willful acts or negligence,
misuse, or use in abnormal conditions.
• Toshiba shall not be responsible for any damage caused by failure to observe the
information described in the operation manual.
Disposal
• When disposing of the device, observe the laws, or ordinances and rules of the local
government.
About using Bluetooth®
This unit is designed for use with Bluetooth® wireless devices compatible with
the A2DP and AVRCP streaming audio profiles. Refer to your Bluetooth® device’s
user manual or technical support to determine if your Bluetooth® device supports
these profiles.
Frequency band used
This unit uses the 2.4 GHz frequency band. However other wireless devices may
use 2.4 GHz frequency band as well and may cause interference with each other.
To avoid interference, please refrain from the use of the unit at the same time with
other wireless devices.
Certification of this device
This unit conforms to frequency restrictions and has received certification based
on frequency laws, so a wireless permit is not necessary.
However, the following action is punishable by law in some countries:
• Taking apart/modifying the unit.
Usage restrictions
• Wireless transmission and/or use with all Bluetooth® equipped devices is not
guaranteed.
• A device featuring the Bluetooth® function is required to conform to the
Bluetooth® standard specified by Bluetooth SIG, and be authenticated. Even if
the connected device conforms to the above mentioned Bluetooth® standard,
some devices may not be connected or work correctly, depending on the
features or specifications of the device.
Range of use
Use this device within an unobstructed 10 m range. The range of use or perimeter
may be shortened depending on any obstructions, devices causing interference,
other people in the room, or the construction of the building. Please note that the
range mentioned above is not guaranteed.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and
are used under license.
Part names
1
3.5mm AUX INPUT jack
2
6.3 mm MIC 2 jack
3
6.3 mm MIC 1 jack
4
ECHO VOL. knob
5
MIC. VOL. knob
6
VOLUME knob
7
MIC PRIORITY button
8
KARAOKE button
9
VOICE CHANGE button
10
BASS BOOST button
11
LIGHT button
12
DISPLAY
13
USB port
14
USB CHARGE port
15
TREBLE knob
16
BASS knob
17
/ / FOLDER / +/- 10 /
REPEAT / RANDOM button
18
button
19
button
20
MUTE button
21
/ FUNCTION
22
Wired microphone
23
Fan openings
24
AC Power cord
25
Transport Rollers
11
5
6
9
3
12
1
2
4
7
8
10
16
21
19
13
15
17
20
18
14
22
23
24
25
Basic functions
Turning on/off the power
1
Press the /FUNCTION to power ON.
Powering off:
Press and hold the /FUNCTION 3 seconds to power OFF.
Notes
• In USB/Bluetooth®/AUX mode, when no operation is performed for 15 minutes,
the unit will automatically enter standby mode. To resume operation, press the
/FUNCTION.
Setting the function mode
1
To change the function, press the FUNCTION button to select the
USB /Bluetooth®/AUX function.
Adjusting the volume
1
Rotate the VOLUME knob to increase or decrease the volume.
Current volume level will be shown on the display.
Lighting mode
1
Press the LIGHT button repeatedly to select the different lighting
mode of LED indicator light on the speaker. The display shows LEd1
to LEd7 and LEd0 (Light OFF).
"LEd1" Slow moving and slow color change
"LEd2" Fast moving sync with the music and slow color change
"LEd3" Rainbow color synce with the music
"LEd4" Circle light breathe and color change synce with the music
"LEd5" RGB color blinking Circle light sync with the music
"LEd6" One color blink with music and color chnage
“LEd7” White color blink
”LEd0” Light OFF
Adjusting the Treble
1
Rotate the TREBLE knob to adjusting the treble.
Adjusting the Bass
1
Rotate the BASS knob to adjusting the bass.
Bass boost function
1
Press Bass boost button to switch the bass boot mode on/off.
The "H-ON" will be shown on the display when the bass boost is switched on
and "H-OF" will be shown when off.
Microphone echo
1
Rotate the ECHO VOL knob to adjusting the echo.
MIC PRIORITY
1
Press MIC Priority button to switch the MIC Priority mode on and off.
The "P-ON" will be shown on the display when the MIC Priority is switched on
and "P-OF" will be shown when off.
If you speak with a microphone when MIC Priority is on, the sound of the
music being played will be reduced.
KARAOKE
1
Press KARAOKE button to switch the KARAOKE mode on and off.
The "ACON" will be shown on the display when the KARAOKE mode is
switched on and "ACOF" will be shown when off.
When KARAOKE mode is on, the center vocal voice of the song is cancelled
orreduced and becomes smaller.
VOICE CHANGER
1
Press the VOICE CHANGE button to change 4 types of voice effect.
The display shows EFE1 to EFE4 and EFE0 (VOICE CHANGE OFF).
EFE1 Female, EFE2 Cartoon, EFE3 Male, EFE4 Transformer.
Mute function
1
Press the MUTE button to mute the sound. The "U-00" will be
shown on the display when switched on.
Press again to restore the sound.
USB operation
Listening to a USB device
This unit provides a USB port for music playback.
1
Connect a USB memory stick or Press the function button.
Connect the USB Memory Stick into the USB playback port. If you already have
a memory stick connected into the port, press the function button repeatedly
to select the USB function.
2
The display will show the total number of folders for 2 seconds and
then show the total number of playable tracks for 2 seconds and
automatically start to play 1st track of the USB device. The elapsed
time will be shown on the display.
3
To pause playback press the button.
The "PAUS" will be shown on the display.
4
To resume play, press the button.
The elapsed time will be shown on the display.
5
To select a desired track, press the or button either while
playing or while paused until the desired track appears on the
display.
The unit will start playing automatically.
6
To search for a particular passage during playback, press and hold the
or button to fast forward and fast backward until the desired
point (passage) is reached, then release the button for normal playback.
Playback will start again from this point.
Caution
• To prevent harmful interference, always connect USB devices directly to the
unit. Do not use a USB extension cable to connect USB devices to the unit.
EN
