background image

25

Operations

24

Turning the power on and off

Operations

Connecting the power cord

1

Insert the power cord connector into
the AC IN socket of the projector.

2

Insert the power cord plug into a
wall or other power outlet.

The ON/STANDBY indicator will
change to orange, indicating standby
mode.

Removing the lens cover

Be sure to remove the lens cover when the power is
turned on. If it is left on, it could become deformed due
to heat.

Turning the power on

Press the ON/STANDBY
button.

When the beep sound is [

On

], the

projector beeps, the power turns on,
and the ON/STANDBY indicator lights
in green. After a moment, the start-up
screen appears.

 CAUTION

• Do not look into the lens while the lamp is on.  The strong light from the lamp may cause

damage to your eyes or sight.

• Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
• Do not place your hands, face, or other objects near the air exhaust. Doing so could cause

burns, deform/break the object.

Power cord connector
(Supplied)

Start-up screen

Control panel

Remote

Control

Notes

• When COMPUTER 2 IN terminal (also used for MONITOR OUT terminal) is used as

MONITOR OUT terminal, the signal which is input to COMPUTER 1 IN terminal is output.

• Signals are output from MONITOR OUT terminal even in standby mode.
   However, from AUDIO OUT terminal, no audio signal is output.
• A computer monitor cannot accept Y/P

B

/P

R

 signals correctly.

• The AUDIO IN terminal doubles for devices connected to COMPUTER 1 terminal and

COMPUTER 2 terminal.

• When an AUDIO OUT terminal is connected, sound is not output from the projector

speaker.

• Output volume of AUDIO OUT terminal can be adjusted by the 

VOL 

button.

• Moving pictures played back on computers using DVD software may appear unnatural if it

is projected with this projector, but it is not a malfunction.

Label locations

Connection (Continued)

Caution

 – use of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.

TLP-X2500

TLP-XC2500

TLP-XC2500

Remote control

Document camera

Содержание TLP X2500
































Отзывы: