manualshive.com logo in svg

Toshiba Tecra 510CDT, Руководство пользователя

Поделиться
Скачать
Toshiba Tecra 510CDT Скачать руководство пользователя страница 125

125

Mobile Computing

Running the computer on battery power

5.375 x 8.375 ver 2.3

To recharge the RTC battery, connect the computer and leave 
it powered on for 24 hours.

It is seldom necessary to charge the RTC battery because it 
charges while the computer is on. If the RTC battery is low, the 
real-time clock and calendar may display the incorrect time 
and date or stop working.

When Hibernation mode is enabled and the RTC battery is 
completely discharged, a warning prompts you to reset the 
real-time clock.

The computer can be used while the RTC battery is being 
charged, although the charging status of the RTC battery 
cannot be monitored.

Monitoring battery power

The computer’s main battery light gives you an indication of 
the main battery’s current charge:

❖

Green indicates the AC adapter has fully charged the 
battery.

❖

Amber indicates the AC adapter is charging the battery.

❖

Off indicates that the battery is not being charged.

Battery life and charge time may vary depending upon power 
management settings, applications, and features used.

NOTE

NOTE

Содержание Tecra 510CDT








































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды