8
S
e
t
t
i
n
g
u
p
t
h
e
P
r
o
j
e
c
t
o
r
Connecting a Laptop Computer
NOTE: Many laptop computers
do not automatically turn on
their external video port when a
secondary display device such
as a projector is connected.
Refer to your computer manual
for the command that activates
the external video port.
Activation commands for some
laptop computers are listed in
the Appendix.
1 Plug the
end of the PR-Cable cable into the video connector on
your laptop.
F
IGURE
7
Connecting the PR-Cable to a laptop computer
Do you want to play your computer’s audio on the projector?
NOTE: If you don’t want audio
or mouse control, you can use a
simplified cable called PR-
Cable Lite, ordered separately.
1 Plug either end of the PR-Cable audio cable into the audio connector
on your computer.
2 Plug the other end of the audio cable into the
connector on the
PR-Cable.
Do you want to control the computer’s mouse from the projector’s remote
or keypad?
If your computer has a PS/2 connector, use the PS/2 mouse cable
NOTE: If you are connecting an
older Macintosh computer that
does not have a 15-pin
connector, you must use a Mac
adaptor between the computer
and the PR-Cable.
1 Plug the
end of the PR-Cable mouse cable into the mouse con-
nector on your computer.
2 Plug the
end of the PR-Cable mouse cable into the
connec-
tor on the PR-Cable.
