background image

Central Remote Controller

Installation Manual

27

-EN

Changing the External Input Function (External Input Settings)

1

On the "Servicing Menu" screen, select "External 
Input Settings" then press [ ] (Confirm)

The "External Input Settings" screen appears.

2

Press [

˄

] and [

˅

] to select the input terminal to set 

then press [ ] (Confirm)

The "Select function" screen appears.

3

Select the function with [

˄

] and [

˅

], press [ ] 

(Confirm), then press [ ] (Control) to go to the next 

screen

The "Select signal" screen appears.
• It is necessary to set the control contents for "Locking" and "Power peak 

cut".

• When "Void" is set, the display returns to the "External Input Settings" 

screen.

4

Select the input signal with [

˄

] and [

˅

], press [ ] 

(Confirm), then press [ ] (Control) to go to the next 

screen

The "Select Zone" screen appears.

5

Press [<] [

˄

] [

˅

] [>] to select the target zone, then 

press [ ] (Confirm)

Press [

] (Confirm) to select/cancel "

".

• In the initial setting, all zones are selected.
• Zones where indoor units are not registered are not displayed.

6

Select the target zones and press [ ] (Control)

The settings are completed and the display returns to the "External Input 

Settings" screen.

Содержание TCB-SC640U-E




































Отзывы: