Central Remote Controller
Installation Manual
18
-EN
Obtain Address
Register the indoor unit to the unit.
If you will not change the Central control address
Set the Central control address with the local remote controller in advance.
If you will change the Central control address with the central controller, see "To change the Central control address (P.19)".
Register/Check Indoor Unit (Address Settings)
1
Select "Address Settings" on the "Servicing Menu"
screen and press [ ] (Confirm)
The "Address Settings" screen appears.
2
Press [
˄
] and [
˅
] to select the item, then press [ ]
(Confirm)
The screen of the selected item appears.
1
Select "Obtain Address" on the "Address Setting"
screen and press [ ] (Confirm)
The "Obtain Address" confirmation screen appears.
2
Press [
˄
] and [
˅
] to select "Yes", then press [ ]
(Confirm)
"Obtaining address...
" appears, and after a while, the "Indoor unit list"
screen appears.
• This operation will take several minutes.
• On the "Obtain Address" confirmation screen, press [
] (Return) or
select "No" and press [
] (Confirm) to return to the "Address Settings"
screen.
Indoor unit list screen
3
On the "Indoor unit list" screen, check that there is
no error in the number of connected units and the
displayed address, then press [ ] (Return)
The "Address Confirm" confirmation screen appears.
• Press [
˄
] and [
˅
] or [
] (Control) to switch pages.
4
Press [
˄
] and [
˅
] to select "Yes", then press [ ]
(Confirm)
After the "Address Settings
" screen, return to the "Servicing Menu"
screen.
This completes "Obtain Address".
• Select "No" and press [
] (Confirm) to return to the "Servicing Menu"
screen without registering indoor units.
Содержание TCB-SC640U-E
Страница 35: ...DEB5219151 2 ...
