27
Down_samp
Select the digital audio signal sampling frequency. (Only available on Coaxial)
48k:
For discs recorded at sampling rate of 48 kHz.
96k:
For discs recorded at sampling rate of 96 kHz.
192k:
For discs recorded at sampling rate of 192 kHz.
Stereo Down Mix
Select whether to downmix the multi-channel audio into fewer channels.
Dolby DRC
Select the Dynamic Range Control (DRC) mode which makes it available to listen to a movie at a low volume
without losing sound clarity.
Off:
Non-dynamic range compress.
On:
Dynamic range compress.
Auto:
Adjust the DRC according to input audio.
The setting of Auto is effective for Dolby
®
TrueHD.
Stereo:
Downmixes the multi-channel audio into two channel stereo. Choose when the unit is
connected to equipment that does not support virtual surround function such as Dolby
®
Pro Logic.
System Setting
1
In the
Setting
menu, use the
/
button to select
System
and press
OK
.
2
Use the
/
button to select an option and press
OK
.
3
Press the button or the
RETURN
button to return to the previous menu.
Surround Encoded (LtRt):
Downmixes the multichannel audio into surround compatible stereo.
Choose when the unit is connected to equipment that supports virtual surround function such as Dolby
®
Pro Logic.
Customizing
Screen Saver
The screen saver helps protect the TV screen. You can turn on/off the screen saver mode.
On:
Sets the screen saver active after approximately 5 minutes without operation.
- The unit will switch to standby mode if there is no operation after the screen saver is engaged for
approximately 20 minutes.
Off:
Turns off the screen saver mode. The unit will not switch to standby mode automatically.
Disc Auto Play
Turns On or Off the disc automatic playback switching mode.
On:
The disc playback automatically after loading.
Off:
Turn off disc auto play mode.
CEC
This feature uses CEC (Consumer Electronics Control) technology and allows you to control Toshiba HDMI™
CEC compatible devices from the player’s remote control via the HDMI™ connection.
On:
Turns on HDMI
TM
CEC features.
With CEC on, pressing
SETTING, PLAY/PAUSE
button will power on the TV when the TV is in the
standby mode. When you turn the TV off, this player will automatically turn off.
Off:
Disables HDMI
TM
CEC features.
Load Default
Resets all settings of the player to initial default state.
- Follow the instructions on the TV screen to confirm the default setting operation.
