26
Customizing
You can also access your settings via the Settings icon on the ePortal.
SPDIF
When you connect an audio system to the COAXIAL DIGITAL output jack, the options are:
Bitstream:
Selects Bitstream output if your receiver SPDIF (Coaxial) IN supports Dolby
®
or DTS
®
or
PCM audio signal.
PCM:
Selects PCM output if your receiver SPDIF (Coaxial) IN only supports PCM stereo audio
signal.
Re-encode:
Selects Re-encode output if your receiver SPDIF (Coaxial) IN supports Dolby
®
or DTS
®
and you want to hear both PIP audio and the movie audio on Blu-ray™ video.
Off:
No audio will be output via COAXIAL DIGITAL output jack.
Bitstream:
Selects Bitstream output if your receiver HDMI IN supports Dolby
®
or DTS
®
or PCM audio
signal.
PCM:
Selects PCM output if your receiver HDMI IN only supports PCM audio signal.
Re-encode:
Selects Re-encode if your receiver’s HDMI IN supports Dolby
®
or DTS
®
and you want to
hear both PIP audio and movie audio on Blu-ray™ video.
Off:
No audio will be output via HDMI OUT jack.
HDMI
When you connect an HDMI
TM
device to the HDMI OUT jack, the available options are:
1
In the
Setting
menu, use the
/
button to select
Audio
and press
OK
.
2
Press the
/
button to select an option and press
OK
.
3
Use the
/
button to select the desired audio setting and press
OK
.
4
Press the button or the
RETURN
button to return to the previous menu.
Audio Setting
Customizing
This section describes the various setting options of this Symbio™ Media Box and Blu-ray Disc™ Player.
If the setup option is greyed out, it means the setting cannot be changed at the current state.
1
Press the
SETTING
button in stop mode to display the setup screen.
2
Press
OK
to enter the Setting menu.
3
Use the
/
button to select an option and press
OK
.
4
Press the button or the
RETURN
button to return to the previous menu.
(Sample Illustration) General operations settings
