Toshiba SureMark 4610 2CR Скачать руководство пользователя | Manualshive

Страница: 61 / 70

background image

Toshiba Global Commerce Solutions Taiwan Product Service Contact Info:

Toshiba Global Commerce Solutions, Inc.

Rm. 1, 5F., No.3-2, Park St., Nangang Dist., Taipei City, Taiwan

Telephone: 0800-001-939

Cable ferrite requirement

All cable ferrites are required to suppress radiated EMI emissions and must not be removed.

Electrostatic discharge (ESD)

Attention: Electrostatic discharge (ESD) damage can occur when there is a difference in charge

between the part, the product, and the service person. No damage will occur if the service

person and the part being installed are at the same charge level.
ESD damage prevention
Anytime a service action involves physical contact with logic cards, modules, back-panel pins, or

other ESD sensitive (ESDS) parts, the service person must be connected to an ESD common

ground point on the product through the ESD wrist strap and cord.
The ESD ground clip can be attached to any frame ground, ground braid, green wire ground, or

the round ground prong on the AC power plug. Coax or connector outside shells can also be

used.
Handling removed cards
Logic cards removed from a product should be placed in ESD protective containers. No other

object should be allowed inside the ESD container with the logic card. Attach tags or reports that

must accompany the card to the outside of the container.

Product recycling and disposal

This unit must be recycled or discarded according to applicable local and national regulations.

Toshiba Global Commerce Solutions encourages owners of information technology (IT)

equipment to responsibly recycle their equipment when it is no longer needed. Toshiba Global

Commerce Solutions offers a variety of product return programs and services in several

countries to assist equipment owners in recycling their IT products. Information on Toshiba

Global Commerce Solutions product recycling offerings can be found on the Toshiba Global

Commerce Solutions product recycling programs website.
Español: Esta unidad debe reciclarse o desecharse de acuerdo con lo establecido en la normativa

nacional o local aplicable. Toshiba Global Commerce Solutions recomienda a los propietarios de

equipos de tecnología de la información (TI) que reciclen responsablemente sus equipos cuando

éstos ya no les sean útiles. Toshiba Global Commerce Solutions dispone de una serie de

programas y servicios de devolución de productos en varios países, a fín de ayudar a los

propietarios de equipos a reciclar sus productos de TI. Se puede encontrar información sobre las

ofertas de reciclado de productos de Toshiba Global Commerce Solutions en el sitio web Toshiba

Global Commerce Solutions product recycling programs.

. Notices

61

«
...
59
60
61
62
63
...
»

Содержание SureMark 4610 2CR







































































Отзывы:

Нет отзывов

Похожие инструкции для SureMark 4610 2CR

Бренд: La Pavoni Страницы: 16

Бренд: Carimali Страницы: 180

Бренд: T-Fal Страницы: 24

Бренд: Citizen Страницы: 73

Бренд: Mr. Coffee Страницы: 13

Dual Brew Pro CFP300

Бренд: Ninja Страницы: 15

Бренд: Scotsman Страницы: 29

Бренд: M&V S.r.l. Страницы: 14

Бренд: Avantco Equipment Страницы: 13

the Barist Express SES875

Бренд: Sage Страницы: 48

Бренд: Saeco Страницы: 33

Бренд: Saeco Страницы: 48

Бренд: AEG Страницы: 19

LM 3200 Amodo Mio

Бренд: AEG Страницы: 24

Бренд: AEG Страницы: 28

Бренд: AEG Страницы: 24

Бренд: AEG Страницы: 32

Бренд: AEG Страницы: 36

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды