Toshiba Strata CT, Инструкция по установке и обслуживанию

Страница: 222 / 385

Peripheral Installation
6-34
Strata CT I&M Manual October 2000
Night Ringing over Selected Page Zones
In systems shared by 1~4 tenants, each tenant’s Exchange lines can be assigned to night ring
separate PIOU external page zones. This feature can also be used in one-tenant systems.
With shared systems, for example, Tenant 1’s night ringing Exchange lines could be
programmed to ring PIOU external page zones 1 and 2, while Tenant 2’s lines could be
programmed to ring zones 3 and 4. In non-shared systems, night ringing Exchange lines can
be assigned to ring all of the zones or just selected zones.
Programming Exchange Lines to Ring Selected PIOU Page
Zones
Program 78-1: Assigns Exchange lines, Tenant 1 through Tenant 4, that will night ring over
PIOU external page zones.
Program *15: Assigns Exchange lines to Tenant 1 through Tenant 4. Lines are initialised as
Tenant 1.
Program 77-3: Assigns Tenant 1 through Tenant 4 Exchange lines to night ring specific PIOU
external page zones.
Program 39: Assigns appropriate
Night Transfer
and
Tenant Pick-up
(for Tenant or
Non-Tenant systems) buttons to electronic and digital telephones.
Note
Any station can pick up Exchange lines that night ring over external page zones by
pressing the [PDN] and dialling
#59
.
PIOU Zone Paging Installation
See “External Page Option Installation” on Page 6-28 , paragraph 4 and Figure 6-18 for
installation instructions.
SMDR Printer/Call Accounting Device Options
An SMDR printer or call accounting device may be connected to the system to provide a
hard-copy record of station activity. The Strata CT system can record incoming, outgoing,
and transferred calls, as well as Account Code entries and names and telephone numbers of
answered DDI and ISDN calls. Call record data is printed out at the completion of each
eligible call. SMDR format is ASCII-formatted, 8-bits, no parity, 1-stop bit.
To support the SMDR printer/call accounting device option, a Strata CT system must be
equipped with a PIOU, PIOUS,...or
◆
For Strata CT only, a RSIU/RSIS, PIOU, and PIOUS
Connection of the printer or call accounting device to the PIOU, PIOUS, RSIU/RSIS PCB is
accomplished with a 3-pair modular cord (seven feet maximum) and a TTY-PC-CABLE/
PPTCIA-3M connector adapter (
Figure 6-21, “PIOU/PIOUS SMDR Cable Connections” ).
Note
PIOU, PIOUS will be 300 or 1200 bps (see Chapter 3 – Universal Slot PCBs );
RSIU/RSIS can be 1200~9600 bps (see Program 76).
The PIOU, PIOUS and RSIU/RSIS contain a call record buffer which stores call record data
(up to 50 calls) when the printed or call accounting device is turned Off, or when no device is
connected to the SMDR port. No further call records are stored after the buffer is filled. When
the printer or call accounting device is made operational, “ERROR BUFFER OVERFLOW”
prints out to indicate the buffer was full, and that some call information may have been lost.
H
C