Toshiba Strata CT, Инструкция по установке и обслуживанию

Страница: 170 / 385

Station Apparatus
5-14
Strata CT I&M Manual October 2000
Note If the HHEU PCB is removed from the phone, the HHEU strap must be replaced for
proper telephone operation.
10. Reinstall the telephone base; secure with the four captive screws.
➤
To adjust the volume of the HESB Loud Ringing Bell
1. Call the telephone connected to the HESB.
2. Adjust the volume control on the back of the HESB and the ring volume control on the
telephone.
Carbon Headset/Handset Straps
If a carbon-type handset or headset is connected to the handset jack on the side of the
telephone, two jumper straps inside the telephone must be cut.
➤
To cut the straps
Note You do not need to cut these straps if the headset is connected to the HHEU.
See Figures 5-1 and 5-7 ~ 5-8 and follow these steps:
1. Loosen the four captive screws on the telephone base, and remove the base.
2. For 2000-series digital telephones, and cut the W201 and W202 carbon straps.
3. Reinstall the telephone base, and secure it with its four captive screws.
Beep Strap
A “beep” sounds whenever a dial pad or feature button is pressed on a digital telephone.
➤
To eliminate the beep sound
See Figures 5-1 and 5-7 ~ 5-8 and follow these steps:
1. Loosen the four captive screws from the telephone base and remove the base.
2. Cut the beep strap.
3. Reinstall the telephone base, and secure it with its four captive screws.
H
C