Toshiba Strata CIX GVPH, Руководство по программированию

Страница: 38 / 184

Configure UADM2 Software
System Parameters
2-16
Strata CIX40 Voice Processing Programming Manual 7/06
tmo_idle
When this value is greater than 0, it enables a special function in voice processing
to go off-hook and back on-hook whenever a port is idle for the specified number of
seconds. This is necessary only when under rare circumstances a telephone switch
may not release a station that is connected to GVPH even after GVPH has gone on-
hook.
Possible values: 0 (disabled), any number (seconds)
Default: 0
tmo_menu
Amount of time voice processing waits before repeating a choice menu.
Possible values: 1~99 (units of 100 ms)
Default: 20 (2 seconds)
tmo_pickup
Minimum amount of time the system waits between an on-hook and off-hook event.
Possible values: 10~99 (units of 100 ms)
Default: 20 (2 seconds)
tmo_resume
Number of seconds voice processing pauses while playing or recording a message.
If this period elapses and the user does not tell voice processing to resume, voice
processing automatically continues to play messages (during playback) or cancels
the recording (during recording).
Possible values: 0~ 255 (seconds)
Default: 30 (seconds)=
tmo_serial
When voice processing is configured to communicate with other peripheral devices
through a maximum time to wait for a response; otherwise, it could potentially wait
forever. This option defines the number of seconds to wait.
Possible values: 2, 3, ..... 99
Default: 2
tmo_silence
Maximum amount of silence time the system waits before deciding to finish a
recording and hang up.
Possible values: 3~15 (seconds)
Default: 4
tmo_sound
Maximum amount of sound/dial tone time the system waits before deciding to finish
a recording and hang up.
Fixed value
trace_cap
Defines the size of the TRACE.OUT file in kilobytes. When the size of the file
reaches its defined maximum, new data begins to overwrite the oldest data in the
file, generating a continuous loop of information.
Default: 362 kbytes (Default is fixed and cannot be changed.)
use_pvc
Voice processing enables the voice board driver’s Positive Voice Control feature
when dialing and expecting a voice to answer.
Default: true (The default is fixed and cannot be changed.)
user_log
Whether the system makes an entry in the specified log file whenever a User ID is
accessed via DTMF. The log entry consists of the date, time and User ID. This is
useful for creating a data file that can later be analyzed for call distributions and
dates, days, and times mailboxes are accessed.
Note When active, grows quickly. Archive or delete frequently.
Default: ‘USERID.LOG’(To enable, remove the starting #.)
Note Default file name is fixed and cannot be changed.
Parameter Description (continued)