Toshiba Strata CIX GVPH, Руководство по программированию

Страница: 28 / 184

Configure UADM2 Software
System Parameters
2-6
Strata CIX40 Voice Processing Programming Manual 7/06
System Parameters
Most System Configuration options do not require modification. We recommend that you
modify the system password immediately. All other options have default values, but can be
modified as required.
Table 2-2 System Parameters
Parameter Description
accept_0_calling_id
Specifies whether GVPH should accept 0 as valid mailbox number. If the parameter
is set to “false,” SMDI packets that include 0 for the “forwarding from station
number” (forwarded call SMDI packets) or for the “calling station number” (direct
call SMDI packet) are not accepted.
Possible values: false (mailbox 0 not accepted), true (mailbox 0 accepted)
Default: false
active_hold
Controls what a caller must do to hold for a busy extension.
True: Caller must continue pressing
*
to hold for a busy extension, enter
another extension, or leave a message at the tone.
False: Caller selects
*
once to hold for a busy extension and the system enables
the caller to hold until he/she is either transferred, selects another
extension, or presses
*
again to leave a message.
Possible values: true, false
Default: true
adpcm_hq NOT SUPPORTED
adpcm_nq NOT SUPPORTED
adpcm_pq NOT SUPPORTED
area_office
When SMDI is being used on a Centrex switch, the value set in this parameter
identifies which calls are from voice mail subscribers by specifying the first few
digits (e.g., area and office codes) that are shared by all subscribers.
Example: In this example, the area_office parameter is set to ‘714583’.
When a call arrives from any telephone number with the first digits of “714583,” the
SMDI subsystem processes it as a subscriber call. If a call arrives and the switch
tells GVPH that the first six digits are not “714583,” the SMDI subsystem treats the
caller as external. Note that the value of
area_office does not need to be only six
digits long. If subscribers share the first five digits of their telephone numbers, then
just those five digits should be stored in this field.
Possible values: up to 10 numeric digits, any combination
Default: (no default) (To enable, remove the starting # and set the value.)
auto_report
Report definition file, (created using UADM2’s Main Menu’s Reports option).
Generates a report automatically at the time specified by
auto_report_time .
Default: RPT.RPT
Note
Default cannot be changed.
auto_report_time
Time of day the automatic report generates using the file specified in auto_report .
The value is in 24-hour format with the colon (:) omitted.
Example: 1:30 a.m. is 0130
2:15 p.m. is 1415
Possible values: 0 (does not generate the auto_report ), 0001~2400
Default: 0