Toshiba Strata Cix DKT2504-DECT, Руководство пользователя, Страница: 27 / 64

Installation
Step 6: Wall Installation (Optional)
Strata CIX DKT2504-DECT User Guide 05/2017
15
Step 6: Wall Installation (Optional)
Important! You must place your DP/DKT-series telephone into 2000-mode before
connecting the cordless telephone; otherwise, the DP/DKT-series tele-
phone will not work. See
Step 3: “Place DP/DKT-series Telephones into
2000-Mode” .
Standard Wall Plate Mounting
These telephones are designed to be mounted on a standard wall plate. To attach the
wall mount stand to the base unit:
1. Select a wall location near a 120VAC outlet
and within reach of the Strata CIX digital line
connection.
2. Slide the wall mount stand into the notches at
the top of the base unit, push the wall mount
stand down and snap it into place (shown
right).
3. Plug the AC adapter into the base unit.
4. Place the AC adapter cord inside the molded
channel of the wall mount stand.
5. Plug one end of the telephone cord into the
LINE jack on the base unit. Optionally, plug one
end of a Strata DP/DKT telephone into the PHONE jack. Then place the telephone
cord(s) inside the molded channel(s) on the bottom of the wall mount stand.
6. Plug the other end of the telephone cord into the modular wall jack.
7. Place the base unit on the posts of the wall
plate and push down until it’s firmly seated
(shown right).
8. Plug the AC adapter into a standard 120VAC
wall outlet.
Note Do not use an outlet controlled by a wall
switch.