Toshiba Strata AirLink DK40i, Руководство по установке и обслуживанию

Страница: 464 / 724

Station Apparatus
Telephone Upgrades
11-14
Strata DK I&M 6/00
Figure 11-10 RPCI-DI or PDIU-DI2 Installation into 2000-series Digital Telephone
Figure 11-11 PDIU-DI Installation into 1000-series Digital Telephone
To P2 of
Bottom PCB
Digital
Telephone
Top Assembly
RPCI-DI or
PDIU-DI2 2000 Digital
Telephone Base
To P1 of
Bottom PCB
RS-232 (Female)
DB-25 Connector
Red
Wire
DIU & VSU
DIU & ADM
Perception
Strap (only cut
if installed on
Perception)
Before
After
RPCI-DI V.2s have stand offs that
require cutting when installed into a
DKT V.1~V.3. Use a wire cutter to trim
the top pieces of the stand offs at the
center of the telephone base before
mounting.
Do not cut the RPCI-DI stand offs when
installing on a DKT V.4 or higher.
Only RPCI-DI V.2s
have these stand offs
3751
To P2 of
Bottom PCB
Red
Wire
DKTO
-20K
D
DKT10-SUB(SPF) TOSHIBA
DVSU
HHEU
Digital
Telephone
Top Assembly
PDIU
To P1 of
Bottom PCB
RS-232 (Female)
DB-25 Connector
Red
Wire
PDIU-DI 1000 Digital
Telephone Base
Important!
Do not connect DIU cables
to HHEU connector.
RED
RED
Directory Tray
Perception
Strap (only cut
if installed on Perception)
PDIU-DI PCB
PDIU/
DVSU
Notes
• A 1000-series digital telephone cannot support an
HHEU and a PDIU-DI at the same time.
• 1000-series telephones do not support RCPI-DIs.
1482