manualshive.com logo in svg

Toshiba SG20 - Magnia - Web Server, Руководство пользователя, Страница: 88 / 331

Поделиться
Скачать
Toshiba SG20 - Magnia - Web Server Скачать руководство пользователя страница 88

Establishing an Internet Connection

Client configuration to access the Internet

  88

Common modem messages displayed on the LCD panel and their meanings are listed 
below: 

You can also view the current status of the modem from the Administration Web site. 
From a client computer, click the 

Admin

 icon, click the 

Network

 tab, and select the 

Internet

 menu item. The current modem status is displayed on the Internet page just 

above the Hangup and Connect buttons.

You can also view a history of the modem messages by clicking the 

View Log

 hyperlink 

to the right of the modem status item. This log can be helpful if you are having difficulty 
connecting to an ISP and wish to see what happened during a connection session. 

Hanging up or disabling the modem

The modem can be connected to the Internet for a variety of reasons. Any client 
computer attached to the local network can cause the modem to dial out when it 
accesses the Internet through a Web browser, email, FTP or other program (including 
running programs like RealPlayer). Also, some internal server programs can cause a 
dial-out to the Internet to manage the internal server cache of Internet information used 
to speed client access.

Once connected to the Internet, the modem generally waits for 20 minutes after the last 
Internet access before hanging up automatically.

Message

Explanation

Modem Ready

The modem is currently hung up, and ready to dial out on request, or to 
accept dial-in networking calls.

Dialing 
<number>

The modem is currently dialing the number indicated.

Connect Error

The modem attempted to connect to the ISP, but failed. Reasons may 
include being unable to negotiate a baud rate, or being disconnected by 
the ISP’s host computer.

No Carrier

The Magnia SG20 dialed a phone number which answered, but the 
modem on the other end did not respond.

Busy

The modem dialed a number that was busy.

No dialtone

The modem did not detect a dial tone when it attempted to dial out.

No Answer

The modem dialed a number which did not answer.

Logging in

The Magnia SG20 is in the process of logging in to the ISP’s network.

Failed to log in

When the Magnia SG20 attempted to log in to the ISP’s network, the log 
in failed. Check the account/password. Alternatively, the ISP’s network 
may be down.

Remote Hangup

The ISP’s host computer disconnected the line.

Dialin

The modem is currently connected to a dial-in networking session.

Содержание SG20 - Magnia - Web Server












































































































































































































































































































































Отзывы:

Нет отзывов