6
TOSHIBA SD-W1101/W1111 DVD-RAM Drive
Verify Jumper
The Verify Jumper pins should be set to OFF mode (no jumper present).
When the jumper is in OFF mode, written data on the media is verified
after the write operation. Writing speed is lower when in OFF mode,
but data reliability is better.
ONE LUN/TWO LUN Jumper
The LUN jumper sets LUN (Logical Unit Number) to ONE LUN or
TWO LUN mode. The default setting is no jumper present, which
sets drive to ONE LUN mode.
ONE LUN mode: Standard mode
TWO LUN mode: For testing only (factory use only)
Terminator ON/OFF Jumper
This jumper turns termination power ON or OFF. The default setting
is termination disabled (no jumper). If you are connecting more than
one SCSI device to your system, and the DVD-RAM is not at the end
of the chain, then terminator jumper is not required.
