26
Preparat
ions
Preparation of the remote control
Insert the specifi ed battery to the remote control. See
page
8
,
9
for safety use of coin-shaped batteries.
1
Gently insert a fi ngernail in groove
q
and pull out the holder in direction
w
.
Take care not to break your fi ngernail.
2
Place a coin-shaped
battery (CR2025) with the
+
side up on the holder.
Keep the holder horizontal so that
the battery does not fall through.
CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only with the same or
equivalent type.
3
Insert the holder into the remote control.
The remote control battery contains Perchlorate
Material - special handling may apply. See
www.dtsc.ca.gov/ hazardouswaste/perchlorate
Operating with the remote control
Point the remote control at the remote sensor and press
the buttons.
Distance: About 3 m (9.9 feet) from the front of the remote
sensor
Angle: About 30° in horizontal direction of the front of the
remote sensor
Do not expose the remote sensor of the player to a strong light
source such as direct sunlight or other illumination. If you do
so, you may not be able to operate the player via the remote
control.
・
Aim the remote control at the remote sensor of the player.
・
Do not drop or give the remote control a shock.
・
Do not leave the remote control near an extremely hot or humid place.
・
Do not spill water or put anything wet on the remote control.
・
Do not disassemble the remote control.
・
If the remote control does not function correctly or if the operating
range becomes reduced, replace the battery with new one.
・
Inserting a battery other than the specifi ed one or an object may
damage the remote control.
2
#
6
Backside
1
2
Within about 3 m (9.9 feet)
SD-P2900SR-E_P2-54.indd 26
07.3.8 9:24:33 PM
Содержание SD-P2900SR
