manualshive.com logo in svg

Toshiba Satellite Pro U500, Руководство пользователя

Поделиться
Скачать
Toshiba Satellite Pro U500 Скачать руководство пользователя страница 137

User ’s Manual

6-5

Power and Power-Up Modes

The charge in the RTC battery is getting low or has been exhausted. You will need 

to set the date and time within the BIOS setup using the following steps:

1.  Press 

F2

 key - the BIOS setup screen will be displayed.

2.  Set the date in 

System Date

.

3.  Set the time in 

System Time

.

4.  Press 

F10

 key. Confirmation message will appear.

Press 

Enter

 key. BIOS setup will terminate and the computer will be rebooted.

After configuring the date and time it is recommended that you switch the 

computer on and then leave it in this state so that the Real Time Clock battery 
can be charged.

Care and use of the battery pack

This section provides the important safety precautions in order to handle your 
battery pack properly.

Refer to the enclosed 

Instruction Manual for Safety and Comfort

 for detailed 

precautions and handling instructions.

n  

Make sure the battery is securely installed in the computer before 
attempting to charge the battery pack. Improper installation could 

generate smoke or fire, or cause the battery pack to rupture.

n 

  Keep the battery pack out of reach of infants and children. It can cause 

injury.

n  

The battery pack is lithium ion battery, which can explode if not replaced, 
used, handled or disposed of properly. Dispose of the battery as required 
by local ordinances or regulations. Use only batteries recommended by 
TOSHIBA as replacements.

n 

 Charge the battery pack only in an ambient temperature between 5 
and 35 degrees Celsius. Otherwise, the electrolyte solution might leak, 
battery pack performance might deteriorate and the battery life might be 
shortened.

n 

 Never install or remove the battery pack without first turning off the power 

and disconnecting the AC adaptor. Never remove the battery pack while 
the computer is in Sleep Mode. Data could be lost.

Never remove the battery pack while the Wake-up on LAN function is 
enabled. Data will be lost. Before you remove a battery pack, disable the 
Wake-up on LAN function.

Содержание Satellite Pro U500





























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды