Key Combination
Function
FN + Z (
)
Toggles the mode of the keyboard backlight
between
Timer
,
On
, and
Off
.
To set up the brightness, click
Start -> dynabook
Settings
. Click
Keyboard
tab, and select a level
under
Keyboard Backlight Brightness Control
.
To set up the timer, launch the dynabook Setup
Utility, select
Power Management -> Keyboard
Backlight Control Mode
, and select
TIMER
.
Adjust the timer under
Backlight Lighting Time
.
This function is supported with some models.
Some functions show the toast notification at the edges of the screen.
Those toast notifications are enabled by default. You can disable them in
dynabook Settings.
To access it, click Start -> dynabook Settings -> Keyboard.
Windows special key
The keyboard provides the key that has special functions in Windows.
This Windows
®
logo key activates the Windows
Start menu
.
Using the Fingerprint Sensor
Some models are equipped with the fingerprint sensor for the purpose of
enrolling and recognizing fingerprints. Lightly touch and rest your finger on
the fingerprint sensor to recognize fingerprints. During enrollment, you
might need to touch and lift your finger on the sensor repeatedly until setup
is complete. Follow the on-screen instructions to finish the setup.
By enrolling the ID and password onto the fingerprint authentication
feature, it is no longer necessary to input the password from the keyboard.
Fingerprint feature enables you to:
Sign-in to Windows
Authentication of the User Password (and, if applicable, the HDD/SSD
Password) when booting up the computer (Pre-Boot authentication).
Single Sign-On feature
User's Manual
4-6
