98
Learning the Basics
Powering down the computer
5.375 x 8.375 ver 2.3
Using Hibernation mode
Hibernation mode shuts the computer down completely, but it
first saves the current mode of the computer to the hard disk.
Since Hibernation mode does not require power to maintain
the saved information, the system settings are retained
indefinitely. Restoring information from the hard disk takes
longer than restoring it from memory. When you start up
again, the computer runs a self-test, loads the operating
system, and then returns to the mode in which you left it.
Factors to consider when choosing Hibernation:
❖
While in Hibernation mode, the computer uses no battery
power.
❖
Because the mode of the system is held on the hard disk,
no data is lost if the main battery discharges.
❖
When starting up again, Hibernation uses less time and
battery power than does Turn off computer.
❖
Restarting from Hibernation uses a little more time and
battery power to start up than restarting from Standby,
because information is being retrieved from the hard disk
rather than from memory.
❖
When starting up again, the computer returns to the mode
in which you left it, including all open programs and files
you were using.
Going into Hibernation mode
If you are not connected to a Windows
®
network server
(domain server), power off the computer using the
Hibernation command as follows:
1
Click
Start
,
Turn off computer
.
The Turn off computer window appears.
2
Click
Hibernate
to place the system into Hibernation
mode.
