Toshiba Satellite M40X-119 Скачать руководство пользователя страница 91

Страница: 91 / 170

User’s Manual

4-23

Operating Basics

DLA for TOSHIBA

Note the following limitations when you use DLA:

■

This software supports only rewritable discs (DVD+RW, DVD-RW, and

CD-RW). It does not support DVD+R, DVD-R, and CD-R discs that are

not rewritable.

■

DLA does not support formatting a DVD-RAM disc and writing to it.

They are performed by DVD-RAM Driver Software. If DLA Format menu

may appear when inserting a DVD-RAM disc into the drive and right-

clicking the drive icon in Windows Explorer, please use “DVDForm” to

format this disc. You can run “DVDForm” by clicking the start button on

the taskbar to display the Start menu and then selecting “All Programs”,

“DVD-RAM”, “DVD-RAM Driver” and “DVDForm” sequentially.

■

Do not use any discs that have been formatted with packet writing

software other than DLA. Similarly, do not use any discs that have been

formatted with DLA with any packet writing software other than DLA.

When using a disc you are not familiar with, format it by selecting Full

Format before using it.

■

Do not use the Cut & Paste function for files and folders. A file or folder

that has been cut may be lost if writing fails due to an error on the disc.

■

When writing the Setup files for the program into a disc formatted by

DLA and starting Setup from this disc, an error may occur. In this case,

plase copy them to your hard disk and then run Setup.

InterVideo WinDVD Creator 2 Platinum

Installing WinDVD Creator 2 Platinum

To install the InterVideo WinDVD Creator 2 Platinum, you must logon with

administrator rights. Before you install InterVideo WinDVD Creator,

close all programs.
1. Insert the Additional Software CD-ROM that contains WinDVD Creator

2 Platinum into your optical disc drive.

2. Follow the installation instructions that appear on the screen.
3. When the installation is complete, restart your computer when

prompted for the changes to take effect.

When writing the Setup files for the program into a disc formatted by

DLA and starting Setup from this disc, an error may occur. In this case,

copy them to your hard disk and then run Setup.

The InterVideo WinDVD Creator 2 Platinum, is availalbe depending on the

model you purchased

Please refer to the on-line Help for additional InterVideo WinDVD Creator

information.

Содержание Satellite M40X-119











































































































































































Результаты поиска

Содержание Satellite M40X-119

Отзывы:

Похожие инструкции для Satellite M40X-119

Бренды по названию

Популярные бренды

Toshiba Satellite M40X-119, Руководство пользователя

Результаты поиска

Содержание Satellite M40X-119

Отзывы:

Похожие инструкции для Satellite M40X-119

Бренды по названию

Популярные бренды