manualshive.com logo in svg

Toshiba Satellite 5200 Series, Руководство пользователя, Страница: 54 / 264

Поделиться
Скачать
Toshiba Satellite 5200 Series Скачать руководство пользователя страница 54

User's Manual

T

HE

 G

RAND

 T

OUR

2-6

 LAN jack

This jack lets you connect to a LAN. The adaptor has
built-in support for Ethernet LAN (10 megabits per second,
10BASE-T) and Fast Ethernet LAN (100 megabits per
second, 100BASE-Tx). The LAN has two indicators. See
Chapter 4, 

Operating Basics

, for details.

Link indicator

This indicator glows green when the computer is connect-

 (green)

ed to a LAN and the LAN is functioning properly.

LAN active

This indicator glows yellow when data is being exchanged

 indicator (yellow)

between the computer and the LAN.

Modem jack

In areas where an internal modem is installed as standard
equipment, there is a modem jack that lets you use a
modular cable to connect the modem directly to a tele-
phone line.

CAUTIONS: 1. In case of a lightning storm, unplug the modem cable

from the telephone jack.

2. Do not connect the modem to a digital telephone line.

A digital line will damage the modem.

Cooling vents

These vents provide an outlet for air pulled through the
computer by the fan.

CAUTION: Be careful not to block the cooling vents. Also be careful to
keep foreign objects out of them. A pin or similar object can damage the
computer’s circuitry.

DC IN 15V

The AC adaptor connects to this socket. Use only the
model of AC adaptor that comes with the computer. Using
the wrong adaptor can damage your computer.

Ether

DC  IN 15V

Содержание Satellite 5200 Series









































































































































































































































































Отзывы:

Нет отзывов