Toshiba Satellite 5200 Series, Руководство пользователя, Страница: 113 / 264

O
PERATING
B
ASICS
4-29
TOSHIBA Remote Control
This section describes how to use the TOSHIBA Remote Control and gives safety
precautions for the batteries.
CAUTIONS: 1. Do not drop the TOSHIBA Remote Control or expose it
to strong impact.
2. Do not store the TOSHIBA Remote Control in places
exposed high heat or high humidity.
3. Do not expose the TOSHIBA Remote Control to water.
4. Do not disassemble the TOSHIBA Remote Control.
Operating conditions
Note the following conditions on effective operation of the TOSHIBA Remote
Control.
1. You can use the TOSHIBA Remote Control at a distance of up to five meters
and within 30 degrees from center of the computer’s Remote Control port.
2. Point the TOSHIBA Remote Control toward the computer’s Remote Control
port when you press a button on the controller.
3. The TOSHIBA Remote Control will not work unless the computer is powered
on while the AC adaptor is connected. This is a precaution to prevent the
TOSHIBA Remote Control from accidently turning on the computer’s power
while you are transporting them.
NOTE: If you disconnect the AC adaptor after turning on the computer,
you can still use the TOSHIBA Remote Control.
4. You cannot use the TOSHIBA Remote Control when the computer is exchang-
ing data with another device through the infrared port.
5. The TOSHIBA Remote Control might not work if the infrared element is
exposed to direct sunlight or fluorescent light when you try to use it.
6. You cannot use another remote controller. Use only the TOSHIBA Remote
Control that came with the computer.
7. If you cannot use the TOSHIBA Remote Control within the limits of its range,
change the battery.
TOSHIBA Remote Control