Toshiba RAV-SM182CTP-UL, Руководство пользователя, Страница: 12 / 56

6
Adjustment of wind direction
For best cooling and heating performance, adjust the
louvers (adjustment plates of up / down wind direction)
appropriately. Cold air descends and warm air rises, so
to heat a room tilt the louvers downward, and to cool a
room tilt them horizontally.
CAUTION
Direct the louvers horizontally for cooling.
If the louvers stay pointed downward during cooling,
condensation may form on the discharge port and /
then drops from the louvers.
• When operation is stopped, the horizontal louver
(plate for adjusting the vertical air fl ow) automatically
closes.
• In heating preparation mode, the horizontal louver
(plate for adjusting the vertical air fl ow) points
upward. The louver starts swinging when the heating
preparation mode has
fi nished, but the swing
indicator appears on the remote controller even in
heating preparation mode.
As characteristics of air, cold air
accumulates lower area and warm
air accumulates upper area.
Return
Wind direction
Swing ON
Louver
◆
How to set up the wind direction
1
Push the [
∧
] / [
∨
] button to
select “1. Wind direction” on the menu
screen, then push the “
Set
Set”
[ F2 ] button.
2
Push the [
∧
] / [
∨
] button to
select the wind direction.
(1) (2) (3) (4) (5)
Operation mode Available directions
Heat, Fan, Auto
(heating)
(1) Ù (2) Ù (3) Ù (4) Ù (5)
Cool, Dry, Auto
(cooling)
(1) Ù (2) Ù (3)
3
Push the [ CANCEL] button to return.
Æ
The screen returns to the menu screen.
In Heat operation
Direct the louver (adjustment plate of up / down wind
direction) downward. If directing at horizontally, hot
air may not come to the foot.
Initial setup
In Cool / Dry operation
Direct the louver (adjustment plate of up / down wind
direction) horizontally. If directing it downward, the dew
may form on the surface of the air discharge port and
may drop down.
Initial setup
In Fan operation
Select a desired wind direction.
Initial setup
◆
Turning on/off the louver swing
Wind direction
Return
Swing OFF
Louver
* When the louver is stopped,
“
Swing ON
Swing ON” is displayed.
1
Push the “
Swing ON
Swing ON” [ F2 ]
button on the “Wind direction” screen.
Æ Pushing the [
∧
] / [
∨
] button on
the “Wind direction” screen while the louver
swing is on stops swinging and sets the wind
direction to (1).
2
Push the [ CANCEL] button.
Æ The screen returns to the menu screen.
◆
To stop the louver swing
Wind direction
Return
Swing ON
Louver
* When the louver is swinging,
“
Swing OFF
Swing OFF” is displayed.
1
Push the “
Swing OFF
Swing OFF” [ F2 ]
button on the “Wind direction” screen.
Æ Push the “
Swing OFF
Swing OFF Swing
OFF” [ F2 ] button to stop swinging. The
louver stops in the position where the button is
pushed.
• The louver does not stop in the position (4) or
(5) when the operation mode is “Cool” or “Dry”.
The louver stops in the position (3) even if
the button is pushed when the louver is in the
position (4) or (5)
Display when the louver swing is stopped
Fan, Heat Cool, Dry
• Pushing [
∧
] / [
∨
] while the
display when the louver swing is stopped
appears on the screen sets the louver in the
position (1).
2
Push the [ CANCEL] button.
Æ The screen returns to the menu screen.
– 11 –
21-EN 22-EN
01_OM_1115653833_EN.indd 11 01_OM_1115653833_EN.indd 11 4/4/2565 BE 11:10 4/4/2565 BE 11:10