8
In FAN operation
In all modes
Display when stopping the swing
Initial setup
Series of
operation
Fan/Heat
operation
Cool/Dry
operation
ON / OFF
FAN
TEMP.
SWING/FIX
TIME
MODE
VENT
UNIT
SET
CL
FILTER
RESET TEST
TIMER SET
ADJUSTMENT OF WIND DIRECTION
• When the air conditioner stops, the louver (adjustment plate of up/down wind direction) directs downward
automatically.
• When the heating operation is in READY states, the louver (adjustment plate of up/down wind direction)
directs upward. The swinging starts after HEAT READY status cleared, SWING
is displayed on the
remote controller even if the heating operation is in READY status.
How to set up the wind direction
1
Push
SWING/FIX
during operation.
The wind direction changes for every push of the button.
In HEAT operation
Direct the louver (adjustment plate of up/down wind direction) downward. If
directing at upward, hot air may not come to the foot.
In COOL/DRY operation
Direct the louver (adjustment plate of up/down wind direction) upward. If directing
it downward, the dew may from on the surface of the air discharge port and may
drop down.
How to start swinging
1
Push
SWING/FIX
, set the louver (adjustment
plate of up/down wind direction) direction
to the lowest position, and then push
SWING/FIX
again.
SWING
is displayed and the up/down wind
direction is automatically selected.
How to stop swinging
1
Push SWING/WIND again while the louver
is swinging.
• The louver stops at a position when you
push. After then, if pushing
SWING/FIX
, the wind
direction descends from the highest posi-
tion.
• In COOL/DRY operation, the louver does not
stop as it directs downward. If stopping the
louver as it directs downward during swing
operation, it stops after moving to the 3
rd
position from the highest position.
Initial setup
Initial setup