19
EN
ENGL
ISH
FRANÇAI
S
DEUTSCH
IT
AL
IA
N
O
ESP
AÑOL
ΕΛΛ
Η
ΝΙΚΗ
POR
T
U
G
UÊS
##
#S
W#
#
#
##
#R
U##
#
Cleaning of the air filter
Cleaning of the remote controller
If you do not plan to use the unit for more than 1 month
1.
Operate the fan for 3 to 4 hours to dry inside of the unit.
• Operate “FAN” mode.
2.
Stop the air conditioner and turn off the main power switch or the circuit breaker.
Checks before operation
1.
Check that the air filters are installed.
2.
Check that the air outlet or inlet is not blocked.
3.
Turn on the main power switch or the circuit breaker for the main power supply to the air conditioner.
MAINTENANCE
WARNING
Cleaning of the air filter and other parts of the air filter can involve dangerous work in high places,
therefore ensure work is carried out by qualified service personnel.
Do not attempt it yourself.
NOTE
For Air conditioning systems which are operated regularly, cleaning and maintenance of the
indoor/outdoor units are strongly recommended.
As a general rule, if an indoor unit is operated for about 8 hours a day, the indoor/outdoor units will
need to be cleaned at least once every 3 months.
Cleaning and maintenance shall be carried out by a qualified person.
Failure to clean the indoor/outdoor units regularly will result in poor performance, icing, water
leaking or even compressor failure.
CAUTION
• Use a dry cloth to wipe the remote controller.
• A cloth dampened with cold water may be used on the indoor unit if it is very dirty.
• Never use a damp cloth on the remote controller.
• Do not use a chemically-treated duster for cleaning nor leave such materials on the unit for long.
It may damage or fade the surface of the unit.
• Do not use benzene, thinner, polishing powder or similar solvents for cleaning. These may cause
the plastic surface to crack or deform.
Thinner
FAN operation