11
EN
ENGL
ISH
FRANÇAI
S
DEUTSCH
IT
AL
IA
N
O
ESP
AÑOL
ΕΛΛ
Η
ΝΙΚΗ
POR
T
U
G
UÊS
##
#S
W#
#
#
##
#R
U##
#
Start
a
START/STOP button
Push this button to start the air conditioner.
b
Mode select button (MODE)
Select Cool
, Heat
(For heat pump models), Fan only
.
(For cooling only models)
c
Temperature button (
)
Set the desired temperature.
When the air conditioner is in FAN ONLY operation, the temperature display is not
displayed. (For cooling only models)
d
Fan speed button (FAN)
Select one of “AUTO”, LOW
, LOW+
, MED
, MED+
, HIGH
.
• The OPERATION lamp (green) on the panel of the indoor unit illuminates. Operation
starts after approximately 3 minutes. (If you select FAN ONLY mode, the unit will start
immediately.)
• The
: Fan only mode does not control temperature.
Therefore, perform only steps
a
,
b
and
d
to select this mode.
Stop
START/STOP button
Push this button to stop the air conditioner.
Start
a
START/STOP button
Push this button to start the air conditioner.
b
Mode select button (MODE)
Select DRY
.
c
Temperature button (
)
Set the desired temperature.
• The fan speed display indicates AUTO.
• The OPERATION lamp (green) on the panel of the indoor unit illuminates, and
operation starts after approximately 3 minutes.
Stop
START/STOP button
Push this button to stop the air conditioner.
COOLING/HEATING/FAN ONLY OPERATION
DRY OPERATION