8
Indoor unit
Turn on the main power supply
l
A waiting period of 3 minutes is required after the power is turned on. During this period, the operation lamp will illuminate. However, the compressor will not
start.
Point the remote control at the remote control receiving module on the indoor unit.
l
The correct signal is con
fi
rmed by the receiving tone and the operation lamp will illuminate.
l
When
button is pressed, the receiving tone will sound and the operation will stop.
The receiving and
transmitting distance.
Approx. 7m from straight
in front of the indoor unit.
l
Check that the signal is transmitted and received at the installed position if the remote control is
fi
xed to the remote control holder.
Notes
l
Use the remote control where the indoor unit can receive the signal. It does not work if the signal is obstructed by curtains or sliding doors.
l
The distance for transmitting and receiving is shorter if a bright light, such as sunlight, affects of the main unit.
l
The distance for transmission and receiving is shorter if the remote control is operated at an oblique angle to the main unit.
Check transmitting and receiving
01_1118350236_EN.indd 8
01_1118350236_EN.indd 8
8/8/2560 BE 12:04
8/8/2560 BE 12:04