8
. PRESET OPERATION
Set your preferred operation for future use. The setting will be memorized by the
unit for future operation (except air flow direction).
1. Select your preferred operation.
2. Press and hold for 3 seconds to memorize the setting. The mark
P
displays.
3. Press : Operate the preset operation.
Press : Start and stop the operation.
Note:
Under certain conditions, QUIET operation may not provide adequate
cooling due to low sound features.
1
1
. COMFORT SLEEP OPERATION
To save energy while sleeping, automatically control air flow and automatically turn OFF.
Press : Select 1, 3, 5 or 9 hrs for OFF timer operation.
Note:
The cooling operation, the set temperature will increase automatically
0.5 degree/hour for 4 hours (maximum 2 degrees increase).
QUIET
9.
AUTO RESTART OPERATION
To automatically restart the conditioner after the power failure (Power of the unit must be on.)
Setting
1. Press and hold the RESET button on the indoor unit for 3 seconds to set the operation.
(3 beep sound and OPERATION lamp blink 5 time/sec for 5 seconds)
• Do not operate ON timer and OFF timer.
2. Press and hold the RESET button on the indoor unit for 3 seconds to cancel the operation.
(3 beep sound but OPERATION lamp does not blink)
12. COMFORT AIR FLOW
• Wide air flow : Air flows around the room.
• Spot air flow : Air flow is concentrated at one point.
Wide
center
Spot
left
Wide
left
Spot
center
Wide
right
Spot
right
Return to
manually setting
10. QUIET OPERATION
To operate at super low fan speed for quiet operation (except in DRY mode)
FILE NO. SVM-17001
- 56 -