28
Getting Started
Using the computer for the first time
Turning on the power
To turn on the computer:
1
Make sure the power is properly connected and ready.
2
Check to ensure that all drives and slots are empty.
Press and release the power button. The ON/OFF light
glows white.
(Sample Illustration) Turning on the power
The pre-installed operating system will load
automatically.
When you turn on the computer for the first time, do not
turn off the power again until the operating system has
loaded completely.
Initial setup
The Windows 8 Startup screen is the first screen displayed
when you turn on your computer for the first time. Follow the
on-screen instructions on each screen in order to properly
install the operating system and begin using your computer.
Setting up your software
The names of windows displayed, and the order in
which windows appear, may vary according to your
software setup choices.
The first time you turn on your computer, the setup guides
you through steps to set up your software. Follow the on-
screen instructions.
Power button
NOTE