background image

Keep foreign metal objects, such as screws, staples and paper clips, out of
the Memory media slot. Foreign metal objects can create a short circuit,
which can cause damage and fire, possibly resulting in serious injury.

DC IN indicator

The 

DC IN

 indicator normally glows red when

power is being correctly supplied from the AC
power adaptor.

Power indicator

The 

Power

 indicator normally glows red when

the computer is turned on. However, if you turn
the computer off into Sleep Mode, this indicator
will blink amber - approximately two seconds on,
two seconds off - both while the system is
shutting down and while it remains turned off.

Battery indicator

The 

Battery

 indicator shows the condition of the

battery's charge - red indicates the battery is fully
charged, amber indicates the battery is charging,
and flashing amber indicates a low battery
condition. Please refer to Chapter 5, 

Power and

Power-Up Modes

 for more information on this

feature.

Hard Disk Drive/Opti-
cal Disc Drive indica-
tor

The 

Hard Disk Drive/Optical Disc Drive

indicator blinks red whenever the computer is
accessing the built-in hard disk drive or optical
disc drive.

Memory media slot in-
dicator

The 

Memory media slot

 indicator blinks red

when the computer is accessing the Memory
media slot.

Wireless communica-
tion indicator

The 

Wireless communication

 indicator glows

red when the Wireless functions are turned on.
Some models are equipped with Wireless
functions.

Wireless WAN/WiMAX
indicator

The 

Wireless WAN/WiMAX

 indicator glows red

when the Wireless WAN/WiMAX functions are
turned on.
In some models, the indicator will glow and blink
in order to indicate the connection status of the
Wireless WAN/WiMAX function.
Some models are equipped with a Wireless
WAN/WiMAX function.

Qosmio X770/X775 Series

User's Manual

2-2

Содержание PSBY5C-03K00Q











































































































































































Отзывы: