background image

User’s Manual

3-6

Getting Started

Turning off the power

The power can be turned off in one of three modes, either Shut Down 

Mode, Hibernation Mode or Sleep Mode.

Shut Down Mode

When you turn off the power in Shut Down Mode no data will be saved and 

the computer will boot to the operating system's main screen the next time 

it is turned on.
1. If you have entered data, either save it to the hard disk drive or to other 

storage media.

2. Make sure all disk/disc activity has stopped before removing the 

CD/DVD or floppy diskette.

3. Click 

Start

4. Click the arrow button (

) located in the power management buttons 

(

) and select 

Shut Down

 from the menu.

5. Turn off any peripheral devices connected to your computer.

Sleep Mode

If you have to interrupt your work, you are able to turn off the power without 

exiting from your software by placing the computer into Sleep Mode. In this 

mode data is maintained in the computer's main memory so that when you 

turn on the power again, you can continue working right where you left off.

Make sure the 

Hard Disk Drive

 indicator is off. If you turn off the 

power while a disk (disc) is being accessed, you may lose data or 

damage the disk.

Never turn off the power while an application is running. Doing so 

could cause loss of data.

Never turn off the power, disconnect an external storage device or 

remove storage media during data read/write. Doing so can cause 

data loss.

Do not turn the computer or peripheral devices back on immediately - wait 

a short period to avoid any potential damage.

When you have to turn off your computer aboard an aircraft or in places 

where electronic devices are regulated or controlled, always completely 

shut down the computer. This includes turning off any wireless 

communication switches or devices, and canceling settings that reactivate 

the computer automatically, such as a timer recording function. Failure to 

completely shut down the computer in this way could allow the operating 

system to reactivate and run pre-programmed tasks or preserve unsaved 

data, which could interfere with aviation or other systems, possibly 

causing serious injury.

Содержание PQX31U-00U00C





























































































































































































































Отзывы: