Toshiba PQX31U-00U00C Скачать руководство пользователя

Страница: 122 / 220

User’s Manual

6-3

Power

DC IN indicator

Check the

DC IN

indicator to determine the power status with the AC

adaptor connected - the following indicator conditions should be noted:

Power indicator

Check the

Power

indicator to determine the power status of the computer -

the following indicator conditions should be noted:

Battery types

The computer has two different types of batteries:

■

Battery pack

■

Real Time Clock (RTC) battery

Battery pack

When the AC adaptor is not connected, the computer's main power source

is a removable lithium ion battery pack, also referred to in this manual as

the battery. You can purchase additional battery packs for extended use of

the computer away from an AC power source although you should not

change the battery pack while the AC adaptor is connected.
Before you remove the battery pack, save your data and shut down the

computer, or place the computer into Hibernation Mode. Please be aware

that, when placing the computer into Hibernation Mode, the contents of

memory will be saved to the hard disk drive, although for safety sake, it is

best to also save your data manually.

Red

Indicates the AC adaptor is connected and is

correctly supplying power to the computer.

Flashing amber

Indicates a problem with the power supply. You

should initially try plugging the AC adaptor into

another power outlet - if it still does not operate

properly, you should contact your reseller or

dealer.

No light

Under any other conditions, the indicator does

not light.

Red

Indicates power is being supplied to the

computer and the computer is turned on.

Blinking amber

Indicates that the computer is in Sleep Mode and

that there is sufficient power available (AC

adaptor or battery) to maintain this condition. In

Sleep Mode, this indicator will turn on for one

second and off for two seconds.

No light

Under any other conditions, the indicator does

not light.

Содержание PQX31U-00U00C





























































































































































































































Результаты поиска

Содержание PQX31U-00U00C

Отзывы:

Похожие инструкции для PQX31U-00U00C

Бренды по названию

Популярные бренды

Toshiba PQX31U-00U00C, Руководство пользователя

Результаты поиска

Содержание PQX31U-00U00C

Отзывы:

Похожие инструкции для PQX31U-00U00C

Бренды по названию

Популярные бренды