User’s Manual
7-5
HW Setup
Device Config
Device Configuration
This option lets you set the device configuration.
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation.
If your operating system does not support USB, you can still use a USB
mouse and keyboard by setting the
USB KB/Mouse Legacy Emulation
item to
Enabled
.
USB-FDD Legacy Emulation
Use this option to enable or disable USB-FDD Legacy Emulation.
Button Setting
Power Button Lamp
This drop-down menu enables you to specify how the Power button lamp
glows depending on the status of your computer.
All Devices
BIOS sets all devices.
Setup by OS
Operating system sets devices that it can control
(Default).
Enabled
Enables the USB KB/Mouse Legacy Emulation
(Default).
Disabled
Disables the USB KB/Mouse Legacy Emulation.
Enabled
Enables the USB-FDD Legacy Emulation
(Default).
Disabled
Disables the USB-FDD Legacy Emulation.
off
Always off
Mode 1
Sets Mode1 Glows blue (Power on), Glows
yellow (Standby), Glows orange (Power off/
Hibernation) (Default).
Mode 2
Sets Mode2 Glows blue (Power on), Alternately
flashes green and orange (Standby), Alternately
flashes green and blue (Power off/Hibernation).
Mode 3
Sets Mode3 Changes in order of green, orange
and blue (Power on), Glows yellow (Standby),
Glows orange (Power off/Hibernation).