User’s Manual
7-4
HW Setup
Network Boot Protocol
This feature sets the protocol to remotely boot from the network.
[PXE]
Sets PXE as the protocol (Default).
[RPL]
Sets RPL as the protocol.
Keyboard
Wake-up on Keyboard
When this feature is enabled and the computer is in Standby mode, you
can turn on the computer by pressing any key. It is effective only for the
internal keyboard and only when the computer is in standby mode.
CPU
This function lets you set the CPU operating mode.
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
LAN
Built-in LAN
This feature enables or disables the Built-in LAN.
Enabled
Enables the Wake-up on Keyboard.
Disabled
Disables the Wake-up on Keyboard (Default).
It is displayed in Pentium-M model only.
Dynamically
Switchable
CPU power consumption and clock speed
automatic switching function is enabled. When
the computer is in use, CPU operation is
automatically switched when necessary
(Default).
Always High
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at its fastest speed.
Always Low
CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption and
low speed.
Enabled
Enables Built-in LAN functions (Default).
Disabled
Disables Built-in LAN functions.