33
Chapter 2
Using the dynadock™ and
Adjusting Settings
Undocking your computer
To avoid losing data and/or damaging your computer and/or
peripherals, be sure to undock your computer from the dynadock™
as described in this section before you do any one of the following:
❖
Disconnect the USB wireless adaptor from your computer.
❖
Disconnect the USB cable connecting your computer to the
dynadock™ (if you are not using a wireless connection).
❖
Move the computer outside of the operational range
(approximately 10 meters/32 feet) of the wireless connection.
"Undocking" your computer stops all communications with the
external devices connected to the dynadock™. After you undock
your computer, it is safe to break the wireless or cable connection
between the computer and the dynadock™.
To undock your computer, either:
❖
Use the button on the top of the dynadock™, or
❖
Use the TOSHIBA dynadock Utility.
If you are using a wireless USB adaptor, you can leave the adaptor
connected to the computer after undocking. However, be careful not
to damage the adaptor (for example, while moving the computer).
NOTE
