Toshiba P1500 - DVD Player - 8, Руководство пользователя

Страница: 56 / 68

56
Connections
AV IN AV OUT S VIDEO
BITSTREAM/PCM
BATTERY
COMPONENT
VIDEO
DC IN 12V
On the setting
• Set the “TV Shape” according to the aspect ratio of your TV.
44 46
• Set the “Audio Out Select” to “Analog 2ch”. 44 47
• When you set the “LCD Picture” to “Fine”, close the LCD or press the LCD MODE button on the main unit to turn the LCD
monitor off.
23 46
INTERLACED outputs/inputs (ColorStream
®
)
Some TVs or monitors are equipped with component video inputs. Connecting to these inputs allows you to enjoy higher
quality picture playback.
Actual labels for component video inputs may vary depending on the TV manufacturer. (ex. Y, R-Y, B-Y or Y, C
B
, C
R
)
In some TVs or monitors, the color levels of the playback picture may be reduced slightly or the tint may change. In such a
case, adjust the TV or monitor for optimum performance.
Notes
• Refer to the owner’s manual of the connected TV (or other equipment) as well.
• When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet before
making any connections.
• Connect the player directly to your TV. If you connect the player to a VCR, TV/VCR combination or video selector, the
playback picture may be distorted as DVD video discs are copy protected.
• If you place the player near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the player
away from the tuner and radio.
• The output sound of the player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening
level. Otherwise, the speakers may be damaged by a sudden high volume sound.
To S VIDEO
To AV OUT
Audio/video cable
(supplied)
S video cable (supplied)
TV
To audio input
(yellow)
To video input
To S video input
To Y To C
B
To C
R
TV equipped
with
component
video inputs
To COMPONENT VIDEO
Component video cable
(supplied)
When using an S video cable, do not connect the
yellow (composite) video cable.
• To obtain sound output from the AV OUT connector, as
in the left figure, connect the red and white plugs of the
supplied audio/video cable to your TV’s audio inputs.
• Pictures cannot be viewed if you are using the player
with the battery pack. Use the AC adapter.
Signal flow
Connecting to a TV
Connect the player to a TV to view playback pictures. For details of output sound, see
39
.
(white) (red)