Toshiba nv-pack Series страница 63 Скачать руководство пользователя

Страница: 63 / 95

Chapter 6 Maintenance and Inspection

6FE8C1621

WARNING

For safety, avoid touching the interior of the
product.

It may cause an electric shock

Mandatory

CAUTION

When touching the product for cleaning, remove
the static electricity from your body.

The static electricity accumulated in the human body
may cause failure of the product.

Mandatory

CAUTION

When cleaning the product, do not change the
switch setting.

Do not exert any stress on the cables.

Exerting stress on the cables by touching them may cause
malfunction or accidents.

Prohibited

CAUTION

Stop using immediately when an error occurs.

When an error occurs such as unable to turn on the
power, stop using and contact one of Toshiba's service
representatives.

Mandatory

6.1 Inspection

6.1.1 Daily inspection

For daily inspection, check the following.

Front panel, Back panel

<LED>

Check if each of the LEDs is visible. If not, clean it with a soft cloth.
Check the LED state from the front side.

<TC-net 100 connector>

Check the following:

•

Cable connection is normal.

•

The modular connector is locked.

•

Cable connection is not loose or has an abnormal appearance.

If any abnormality is found, contact one of Toshiba's service representatives.

Ventilation hole

Check the front panel and back panel ventilation hole of the product for dust
or stain. If the ventilation hole is blocked by dust or stain, remove the dust
with a vacuum cleaner, and then wipe it with a soft cloth.

Содержание nv-pack Series
































































































Результаты поиска

Содержание nv-pack Series

Отзывы:

Похожие инструкции для nv-pack Series

Бренды по названию

Популярные бренды

Toshiba nv-pack Series, Инструкция по эксплуатации

Результаты поиска

Содержание nv-pack Series

Отзывы:

Похожие инструкции для nv-pack Series

Бренды по названию

Популярные бренды