User’s Manual
4-11
NB500/NB505/NB520/NB525/NB550D/NB555D Series
General
This window displays the BIOS/EC version and contains two buttons :
Default
and
About
.
Setup
This field displays the installed
BIOS version
,
date
and
EC version
.
Password
This option allows you to set or reset the user password for power on.
User Password
Lets you register a new password or change/remove an existing password.
To enter a user password:
1. Select
Registered
to display the following prompt:
Enter Password:
Enter a password of up to 8 characters. The character string you enter
is displayed as a string of asterisk.
2. Click
OK
. The following message appears, allowing you to verify the
password.
Verify Password:
3. If character strings match, the password is registered. Click
OK
. If they
do not match, the following message appears. You must repeat from
step 1.
Entry Error!!!
To delete a user password:
1. Select
Not Registered
to display the following prompt:
Enter Password:
2. Enter the currently registered password. The character string you enter
is displayed as a string of asterisks.
3. Click
OK
. If the character string you enter matches the registered
password, the password option is reset and the display changes to:
Not registered
If they do not match, the following message appears. You must repeat
from step 1.
Incorrect Password.
Default
Return all HW Setup values to the factory settings.
About
Display the HW Setup version.
Not Registered
Changes or remove the password. (Default)
Registered
Selects the password. A dialogue box will appear
to allow you to set the password.
