Toshiba MMY-MAP0804FT7(Z), Руководство по обслуживанию, Страница: 135 / 333

– 135 –
1
Push and hold the TIME and buttons at the same time for more than 4 seconds.
At first, the line 1 and CODE No.
AC
(Address Change) are indicated on the LCD display.
(Select an outdoor unit.)
2
Push
UNIT LOUVER
the (left side of the button) and SWING/FIX buttons repeatedly to select a system
address.
3
Push the
SET
button to confirm the system address selection.
• The address of an indoor unit connected to the selected refrigerant line is indicated on the LCD display
and its fan and louvers are activated.
4
Push the UNIT LOUVER button (left side of the button). Each time you push the button, the indoor
unit numbers of the selected refrigerant line are indicated one after another.
• Only the fan and louvers of the indicated indoor unit are activated.
To select another system address
5
Push the
CL
button to return to step
2
.
• After returning to step
2
, select another system address and check the indoor unit addresses of the line.
6
Push TEST the button to finish the procedure.
Changing the indoor unit address using a remote controller
To change an indoor unit address using a wired remote controller.
The method to change the address of an individual indoor unit (the indoor unit is paired
with a wired remote controller one-to-one), or an indoor unit in a group.
(The method is available when the addresses have already been set automatically.)
3
5
8
1
4
2, 6, 7
ON / OFF TEMP.
TIME
SET CL
FILTER
RESET TEST
TIMER SET
CODE No.
UNIT No.
SETTING DATA SET
R.C. No.
Finish
(Execute it while the units are stopped.)
1
Push and hold the
SET
,
CL
, and
TEST
buttons at the same time for more than 4 seconds.
(If 2 or more indoor units are controlled in a group, the first indicated UNIT No. is that of the head unit.)
2
Push the
UNIT LOUVER
button (left side of the button) repeatedly to select an indoor unit number
to change if 2 or more units are controlled in a group. (The fan and louvers of the selected
indoor unit are activated.)
(The fan of the selected indoor unit is turned on.)
3
Push the TEMP. / buttons repeatedly to select
13 13 13 13 13
for CODE No..
AMP Air Conditioning www.ampair.co.uk | sales@ampair.co.uk