72
Error detected by TCC-LINK central control device
Error detected by AI-NET central control device
∗
These errors are concerned to communication of remote controllers (A, B) and central system [AI-NET X, Y], and the main remote controller displays [E01], [E02], [E03], [E09], or
[E18] in some cases and displays none in other cases according to the contents.
Check code
Display on
central control
device
C05
C06
C12
P30
Outdoor 7-segment display
Check code
Sub-code
—
—
—
(L20 is displayed.)
AI-NET
central control
remote controller
—
—
—
Detected
position
TCC-LINK
General-
purpose device
I/F
TCC-LINK
Check code name
TCC-LINK central control
device transmission error
TCC-LINK central control
device receiving error
Interface batch alarm of
general-purpose control
devices
Follower unit error of group
control
Duplicated central control
address
Status
Operation
continued.
Operation
continued.
Operation
continued.
Operation
continued.
Operation
continued.
Error detection condition
Signal is not transmit from central
control device.
Signal is not received from central
control device.
Error was input in general-purpose
control device control interface.
An error occurred in follower unit of
the group control.
([P30] is displayed only on the
central control remote controller.)
Central control addresses were
duplicated.
Check item (position)
• Check central control device error.
• Check communication line error of central control device.
• Check setup of end terminal resistance.
• Check central control device error.
• Check communication line error of central control device.
• Check setup of end terminal resistance.
• Check the power of connecting destination connected device.
• Check P.C. board error of the connected device.
• Check error input.
• Check the check code of the unit with alarm.
• Check the address setup.
Differs according
to error contents of the with alarm
Check code
Main
remote
controller
—
—
—
Outdoor 7-segment display
Check code
Sub-code
—
—
—
—
—
—
AI-NET
central control
remote controller
97
99
b7
Detected
position
AI-NET
AI-NET
AI-NET
Check code name
AI-NET communication system
error
Duplicated network adaptors
Error in indoor group
Status
Operation
continued.
Operation
continued.
Operation
continued.
Error detection condition
E07/L07/L03/L08 was detected
when other indoor unit in the group
was defective.
Multiple network adaptors were
connected to communication line
of remote controller.
(Detected at central controller side)
Error of follower unit in the group
Check item (position)
• Check multiple network adaptors.
• Check wire and miswiring of remote controller: Only one
network adaptor can be connected to communication line of
remote controller.
• Check communication line, miswiring, and power of indoor unit.
• Check communication. (X, Y terminals)
• Check network adaptor P.C. board.
• Check the central controller
(Central control remote controller, etc.)
• Check follower unit in the group.
