103
Using the Timer
Shutting down the gigabeat® after a set time (sleep)
The countdown timer is set and the countdown begins. To stop
the countdown, press the Enter button again. To restart the
countdown, press the Enter button again. When the countdown
reaches 0 (zero), the timeout notification screen is displayed.
The gigabeat
®
stops any music that is being played and sounds
the alarm.
8
Press the Enter or Back button to stop the alarm.
❖
You cannot record while the countdown is running.
❖
Turning the gigabeat
®
off during a countdown cancels the
countdown.
❖
To check the countdown time after viewing another screen,
perform steps 1 through 6 above.
❖
The alarm stops after approximately 1 minute.
Shutting down the gigabeat
®
after a set time (sleep)
You can use the timer to have the gigabeat
®
to shut itself down after
a specified time. However, if you have already set 5 minutes as the
Auto Power Off
setting, the gigabeat
®
will turn off after
approximately 5 minutes if it is not used.
1
Press and hold the Back button until the main menu is
displayed (about 1 second).
2
Press the Up or Down button to select
Timer
.
(Sample Illustration) Selecting Timer from the main menu
3
Press the Right or Enter button.
The Timer
menu screen is displayed.
4
Use the Up or Down button to select
Sleep
.
NOTE
Library
FM Radio
Line-in Recorder
Photos
Timer
Settings *