Toshiba MCY-MHP0404HT, Руководство по обслуживанию, Страница: 165 / 184

164
No. Component Procedure Remarks
⑭
PMV coil 1. Detachment
1) Perform Step 1 of ① .
2) Remove the connector connected between the
interface P.C. board and PMV coil.
CN300 ...PMV coil (6P: white)
3) Remove the lead wire from the lead wire clamp
(1 position) and the banding band (3 places).
4) Remove the coil from PMV body while pulling
it upward.
2. Attachment
1) Match the positioning extrusion of the coil
surely to the concavity of PMV body to fix it.
CAUTION
Using a banding band on the market, be sure
to fix the lead wire.
PMV coil
PMV body
Banding band
(3 places)
Lead wire clamp
(1 position)
⑮ Fan guard
1. Detachment
1) Perform Step 1 of
①
, Step 1 of
②
.
CAUTION
For scratch protection, work on a carton box,
cloth, or the like.
2) Remove the discharge cabinet and place it with
the fan guard side facing downward.
3) Remove the hook of the fan guard by pushing it
with a flat-head driver or the like.
4) Remove the fan guard from the discharge
cabinet.
Fan guard Discharge
cabinet
Hooks
(6 positions)
Screws
(2 positions)
2. Attachment
1) Insert the upper protrusion of the fan guard into
the square hole of the discharge cabinet, and
insert the hook.
Push the hooks (5 positions) with your hand to
fix them.
CAUTION
Confirm that all the hooks are securely fixed
to specified positions.
Hooks
Flat-head driver