Toshiba License, Руководство по обслуживанию

Страница: 23 / 32

8
© 2018-2022 Toshiba Tec Corporation All rights reserved License Management
TROUBLESHOOTING
8 - 3
8.3 When the SYS Board is Replaced
Replace the SYS board in accordance with the procedure described in the Service Manual for the MFP.
Remarks:
Use the non-used SYS board supplied as a service part for the replacing.
8.4 When the SRAM is Replaced
Replace the SRAM and reboot the equipment in accordance with the procedure described in the
Service Manual for the MFP.
8.5 When the LGC Board is Replaced
Replace the LGC board in accordance with the procedure described in the Service Manual for the MFP
and shift into the FS-08 mode.
Remarks:
Use the non-used LGC board supplied as a service part for the replacing.