Toshiba License, Руководство по обслуживанию

Страница: 15 / 32

5
© 2018-2022 Toshiba Tec Corporation All rights reserved License Management
HOW TO ACTIVATE THE LICENSE
5 - 3
5.3 Activation of the Subnet License and the Domain License in
the 2nd or Later Unit of the Equipment
For the subnet license and the domain license, it is required to activate the license in several units of
the equipment. The equipment in which the license has been activated by means of the license
authentication ID or the license file will be the host unit. By using an export license file exported from
this host unit, activate the license of other units of the equipment in which required conditions are
satisfied. For details about the conditions, refer to

P. 2-1 “2.1 Types and Categories”.
(1) On the License Management screen of the host unit, press [Details] of the license file to be
exported.
(2) Press [Export] in the License Details screen.
Remarks:
• [Export] is displayed on the screen only for the Subnet license and the Domain license.
• In case of the export license file: “LIC_xxxx_Export.zip”
xxxx: A different value appears depending on the license.
(3) Insert a USB storage device to store the license file into the equipment and press [OK].
(4) The confirmation screen appears. Press [Yes].
(5) The confirmation screen indicating the success of the processing appears. Press [OK] and
remove the USB storage device.
(6) Insert the USB storage device with the export license file stored into another unit of the
equipment in which the required conditions are satisfied. Activate the license.
Remarks:
• The export license file can be used in several units of the equipment.
• The activation procedure is the same as that for [Offline].