Toshiba IPedge, Руководство по установке

Страница: 159 / 196

Server Based Call Manager Configuration Create User Groups
Installation Manual June, 2011 13-19
• For Long Distance Calls add +1 – Check the box when you need to
have a leading one (1) added when making long distance calls
outside your home area code.
• Click Save when done.
Test a Phone Number Test a Phone Number – Dialing plans can become complex. Use these
boxes to enter different telephone numbers and check to see the number
that will be dialed. The dialed number should be identical to what you
need to dial when using your phone to manually dial.
Server Based Call
Manager Configuration Creating a Server-based Class of Service for Call Manager begins in the
group creation of Net Server administration, followed by creating your
configuration on the Call Manager Admin, then publishing the
configuration files to the Net Server.
The steps below show an example of creating two user groups, users and
administrators, and assigning a class of service to each. Multiple groups
can be assigned, each with its own configuration created by the
Administrator common to that group.
Create User Groups 1. Use Net Server > Setup and click User Groups tab.
2. Click Add button
3. Type in a group name to represent the Call Manager administrator
(CallManager Admin in this example) and click Save.
4. Click Add button again, and this time, type in a name to represent the
Call Manager Users’ group (Call Manager User in this example).
5. Repeat above steps for other groups if necessary.