IPedge CONFIGURATION
Trunk Protocol and Configuration
12-16
Installation Manual August, 2011
10. Select
Protocol Configuration > Routing Tables > Tel To Ip
Routing
Src Trunk Group = *
Dest Phone Prefix = *
Source phone Prefix = *
Dest IP Address = 192.168.254.254 (IP address of the IP
edge
server)
11. Select
Protocol Configuration > Routing Tables > IP To Trunk
Group Routing
Dest Host Prefix = *
Source Host Prefix = *
Dest Phone Prefix = *
Source phone Prefix = *
Source IP address = *
Trunk Group = 1
IP Profile ID = 0
Source IP Group ID = -1
IP
edge
CONFIGURATION
This section is the IP
edge
configuration.
1. Set up Trunk ILG
2. Set Trunk OLG
3. Set the Channel Group
4. Set the Service definition
5. Point the SIP server IP address to the Audio codes.
6. Set service assignments.
7. Set URI’s for each of the Audiocodes AUTO DIAL number
programed.
8. Set DID or DID intercepts.
9. Select
Station > Station Assignment
In the Basic tab set:
Network Calling Number = 10 digit number to be sent out on the SIP
trunk. This 10 digit number must be in the SIP Trunking URI table as
a Main URI, and either registered or valid number.
Содержание IP edge EC
