77
Aut
o: If you set Exposure mode as
Auto
, lens iris will be controlled automatically, the Exposure time and
Gain control will be not configurable since the sensor library will automatically adjust the value according
to the ambient light. Then you can set iris mode as "indoor" or "outdoor" to reach the best image quality.
You can click
Preview
to fine-tune the image, or click
Restore
to recall the original settings without
incorporating the changes. When completed with the settings on this page, click
Save
to enable the
settings.
If you want to configure another sensor setting for day/night/schedule mode, please click
Profile
to open
the Profile settings page as shown below.
Please follow the steps below to setup a profile:
1. Check
Enable and apply this profile
.
2. Select the applied mode: Day mode, Night mode, or Schedule mode. Please manually enter a range
of time through which you want the Schedule mode to apply.
3. Configure Exposure control settings in the folowing columns. Please refer to the previous page for
detailed information.
4. Click
Save
to enable the setting and click
Close
to exit the page.
2011/03/13 17:08:56
